Troubleshooting a Water Heater Emergency: What to Do When It Stops Working
Troubleshooting a Water Heater Emergency: What to Do When It Stops Working
Blog Article
We've noticed the article involving No Hot Water — Water Heater Repair directly below on the web and think it made good sense to write about it with you over here.
Many modern residences take advantage of an electrical hot water heater for their heating unit, because of its convenience and convenience of use. Nevertheless, much like any other electrical appliances, troubles might occur with its usage, all of a sudden. It can be actually discouraging to wake up to a cold shower as opposed to a hot one or having your bath with water that isn't warm sufficient or even also warm. Whatever the case may be, water heater troubles can be rather nerve-racking. The good news is, we have actually made a list of feasible options to your water heater problems. There are a number of variables that might cause most of these issues, it could be a concern with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the trouble is, getting it repaired need to not position too much of a problem if you comply with these actions:
Inspect Your Power Supply:
As standard as this may appear, it is very essential. Without appropriate power, your hot water heater will certainly not work. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the concern, just transform it off and on once again. Change any damaged or damaged fuse. Evaluate the appliance with power after these adjustments to see if it's now working.
Examine the Heating Element in the Water Heater:
If it's not a power issue, after that try having a look at your heating element if it is still working. Evaluate each of your heating elements to make sure the trouble isn't with any one of them. If any of them is damaged, change that component and after that examine whether the warm water is back on.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot enough, you might require to check the temperature level setups on your upper thermostat. Make sure the breaker is turned off prior to doing anything. Open the gain access to panel and press the red button for temperature reset above the thermostat. This should aid warm the water. Turn the circuit breaker back on and also examine if the trouble has actually been resolved.
Call A Professional:
If after changing all damaged components and also resetting your temperature, the water heater still isn't working, you might need to call an expert plumber for a professional opinion. The issue with your heating system could be that the hot and cold taps have been switched or it may be undersized for the amount of hot water needed in your home. Whatever the case may be, a professional plumber would help solve the problem.
Conclusion
Water heater problems are not always significant. Most of them result from small concerns like a blown fuse or damaged burner. Replacing the defective parts should suffice. However, if you are still unable to address the trouble, give a call to your nearby plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed reading our topic on No Hot Water — Water Heater Repair. Thanks for finding the time to read our blog. In case you liked our blog post please remember to share it. Thanks for your time. Don't hesitate to come visit our blog back soon.
Ring for results! Report this page